Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Page 51 Owner’s Manual
Cal Flame Entertainment System Owner’s Manual
There are two types of closed captioning available: C1 (Caption 1)and C2 (Caption 2). C1 displays the full
translation of the primary language in your area. C2 may be used as a source for secondary languages,
simplified English, or other translations transmitted in your area.
Closed captioning is not available on all channels or at all times. Only specific programs are encoded with
closed captioning information.
4. Press either CHANNEL up or down to select the function. Make sure the highlight bar is SET PICTURE
and then press ENTER.
5. Select the item to adjust. For example:
To adjust brightness, press CHANNEL up or down buttons to select BRIGHTNESS and press ENTER.
6. Adjust the level by pressing VOLUME.
7. To adjust other items, repeat all of the above.
NOTE
: The menu or display disappears from the screen if you do not press + or - within a few seconds.
Whenever a menu or display disappears from the screen, and + or - buttons on the front of the
TV become the volume adjustment buttons. If you want to adjust the picture only, you can use
the remote control by simply pressing the PICTURE SELECT.
Description of Adjustment Items
ITEM
ADJUSTMENT
Press VOLUME Down Press VOLUME Up
CONTRAST Decrease picture contrast Increase picture contrast
for soft color for vivid color
BRIGHTNESS Darken the picture Brighten the picture
SHARPNESS Decrease picture sharpness Increase picture sharpness
TINT Decrease Tint Increase Tint
COLOR Decrease color intensity Increase color intensity
To restore the factory settings
Select the item of picture while the main menu is displayed. Then select the item of RESET. All the picture
functions (CONTRAST, BRIGHTNESS, SHARPNESS, TINT, COLOR) will go back to the factory settings.
8. Press either CHANNEL up or down to select the function. Make sure the highlight bar is AUTO
PROGRAM and then press ENTER.
9. Press CHANNEL either up or down to select the function. Make sure the highlight bar is ANTENNA
INPUT and then press ENTER.
Remote Infrared Sensor/Repeater
The LCM1502TV incorporates a Infrared Sensor which relays the signals from the remote control to allow the
LCM1502TV to be controlled simply by pointing it’s remote control at the remote sensor. This provides con-
trol of the auxiliary equipment such as a Flex vision VCR or DVD Player. The Remote Infrared Sensor can relay
signals from most manufacturers Remote Control to its respective component connected to the Video 1 and 2
inputs. In this case you must use the Remote Control supplied with the other manufacturers component.