Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Control panel
1
1-38
1.17
Introduction Chapter 1
1.17 Control panel
The control panel consists of the touch panel, which can be used to specify settings for the various functions,
and various keys, such as the [Start] key and the [Stop] key. The operations that can be performed with these
keys are described below.
In this manual, [ ] indicates keys on the control panel and buttons in the touch panel.
No. Part Name Description
1 Touch panel Displays various screens and messages.
Specify the various settings by directly touching the panel.
2 Power indicator Lights up in blue when the machine is turned on with the main
power switch.
3 Sub power switch Press to turn on/off machine operations. When turned off, the
machine enters a state where it conserves energy.
4 [Power Save] key Press to enter Power Save mode. While the machine is in Pow-
er Save mode, the indicator on the [Power Save] key lights up
in green and the touch panel goes off. To cancel Power Save
mode, press the [Power Save] key again.
5 [Memory Mode] key Press to register (store) the desired copy/fax/scan settings as a
program or to recall a registered program.
6 [Utility/Counter] key Press to display the Utility/Counter screen.
7 [Reset] key Press to clear all settings (except programmed settings) en-
tered in the control panel and touch panel.
8 [Interrupt] key Press to enter Interrupt mode. While the machine is in Interrupt
mode, the indicator on the key lights up in green and the mes-
sage "Now in Interrupt mode." appears on the touch panel. To
cancel Interrupt mode, press the [Interrupt] key again.
9 [Stop] key Pressing this key while copying, scanning or printing temporar-
ily stops the operation.