Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
17
CS 5 LEG ASSEMBLY
Required Tools: Adjustable Wrench
1. Match the holes in each leg with corresponding holes in cooker.
2. Slide 1/4” x 1” bolt through
each of the twelve holes.
These should be directed
inward as in the illustration so
that the nuts will be on the
inside of the assembly.
3. Screw 1/4” nut onto each bolt
and wrench tighten. Make
certain every bolt and nut
assembly is completely
tightened so the unit will stand
sturdily with no sway when
the unit is upright.
CS 8 LEG ASSEMBLY
No Tools Required
1. This cooker has four legs with crossbars and two stabilizer bars.
2. Flip the legs into the standing
position.
3. Hook each stabilizer bar over the
crossbar on the leg opposite it. The hook
on the end of the bar must be pressed
down around the crossbar so that the leg
is locked into position. Always recheck
that both hooks are in place before
lighting the cooker or placing cooking
equipment on top of the cooker.
1/4"x1"
Bolts (12)