Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
11” CAST COOKER
ASSEMBLY
Required Tools: Adjustable
Wrench and Leak Testing
Solution
1. Wrench tighten the brass
control valve to the 11”
casting.
2. Wrench tighten the brass
3/8” flare swivel fitting to
the brass control valve.
3. Tighten left handed
threads on POL nut hand
tight to the cylinder and
then secure with a wrench.
Caution: Do not turn
regulator or nipple.
4. The hose to burner (brass adapter) connection must be tightened and leak tested. See leak test
instructions before use.
5. Go to the Use and Care Section of this manual for further instructions.
FRY BASKET HANDLE ASSEMBLY
Required Tools: Adjustable Wrench and Screwdriver
1. Attach handle by inserting bolts (round head to
inside of pan) into holes indicated in black. Also
insert bolt (round head to inside of pan) into hole
indicated with an “X”. Apply nuts and tighten.
(This bolt helps hold the basket away from pot
when hooking it on the side of the pot to drain oil
from food.)
N
O
14
Insert Bolts in marks as instructed