Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
16
CAMP STOVE LEG ASSEMBLY
Required Tools: Adjustable Wrench
1. Match the holes in each leg with corresponding holes in
cooker.
2. Slide 1/4” x 1” bolt through each of the twelve holes.
These should be directed inward as in the illustration so
that the nuts will be on the inside of the assembly.
3. Screw 1/4” nut onto each bolt and wrench tighten.
Make certain every bolt and nut assembly is completely
tightened so the unit will stand sturdily with no sway
when the unit is upright.
CAMP STOVE SHELF ASSEMBLY FOR CS 2L WS AND CS 3L WS
Required Tools: Adjustable Wrench
1. Slip shelf lip under angle
iron. (A)
2. Install 1/4” x 1” bolts
through holes. Wrench tighten
1/4” nut to bolt. (B)
CS 4L EXTENSION LEGS ASSEMBLY INSTRUCTIONS
Required Tools: Adjustable Wrench
1. Match the holes in each leg with the
corresponding holes in the cooker as
pictured at right.
2. Slide one 1/4” x 1 “ bolt through each of
the three holes in each extension leg and
cooker leg. These should be directed
inward so that the nuts will be on the
inside of the assembly.
3. Screw 1/4” nut onto each bolt and wrench
tighten. Make certain that every bolt and
nut assembly is completely tightened so
that the unit will stand sturdily with no
sway when the unit is upright.
1/4"x1" bolts (12)
N
O
For Outdoor Use Only
(A) (A)
(B)
(B)
(B)
(B)