Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Internet Service Node (ISN) 2.0 Release Notes
Page 17
Identifier Severity
Headline Release-note Enclosure
CSCma23587 4
VB may return RNA for other
transfer failure conditions
The ISN VB is incorrectly sending a
RingNoAnswer result for some transfer failures
which occur for reasons other than
RingNoAnswer. This has been seen in
laboratory conditions with misconfigured target
Voice Gateways causing some type of general
transfer failure. This may create confusion
when trying to diagnose transfer failure
causes.
CSCma23684 4
ISN Voice Browser does not
support Play Media with no
prompt
If the "Play Media" script node is given with no
media file, the ISN Voice Browser will generate
an error. This should not be an error condition;
it should simply do nothing and return
"success".
CSCma23749 4
When printing metrics, rarely
get incorrect counts in
snapshot stats
Symptom: Rarely, doing a
"ShowSnapshotStatistics" from VBadmin or
looking at snapshot statistics in VB metrics
will show an incorrect count of calls.
Conditions: Unknown
Workaround: None
CSCma23928 4
GW-Overload ERROR:Cannot
receive ReEstablishChannel in
CWaitInOLCAck
When the Voice GW is overloaded, it may not
be able to properly accept or reject calls, and
the ISN Voice Browser creates the following
log message: ERROR:Cannot receive
ReEstablishChannel in state CWaitInOLCAck.
Conditions: This has been seen only in
laboratory conditions where a defect in another
product flooded the GW.
Workaround: Do not overload the voice
gateway beyond its quoted rating.
CSCma23959 4
Negative values reported for
Call Throughput Latencies
The App Server occasionally computes and
reports negative values for the Call Throughput
Latencies.
CSCma24085 4
DTMF is not relayed for CCM
originated calls
DTMF is not relayed from outbound call leg to
inbound when call originates from IP phone on
CCM and terminates on IP phone at CCM.
This is because when the DTMF is relayed, it
is always proxied using alphanumeric.
CSCma24096 4
TransferCLI and SetupCLI
should be configured
independently
Symptom: If customer chooses to pass the
caller id in the ARQ request to the gatekeeper,
they cannot choose to pass DNIS in the setup
message on the transfer - they can only pass
caller id.
Workaround: None