Status Acoustics 2 Outdoor Cart User Manual


  Open as PDF
of 29
 
Internet Service Node (ISN) 2.0 Release Notes
Page 16
Identifier Severity
Headline Release-note Enclosure
CSCma20667 4
Null pointer exception in AS
warning message
Rarely, the following error message will appear
in the Application Server logs: 824: Oct 09
17:33:43.718 EDT %ISN-SS_HTTP-4-
WARNING:Error in interval
420:java.lang.NullPointerException. The
problem occurs in dormant internal metrics
calculations, and have no impact on call
processing or customer-visible metrics
reliability. The system contains the error, and
continues processing calls in a normal
manner.
CSCma21100 4
App Server install, password
isn’t validated until reboot/won’t
come up
During the ISN Application Server installation,
if you enter the same invalid password twice
for the associated NT Administrator login,
validation does not occur. An error will occur
after Reboot during DC Directory schema
update. The error is "System error 1069 has
occurred. The service did not start due to a
logon failure." and is seen on the command
window entitled "--Cisco User Preferences
Support--". The work around is to run the
AppServer Reboot.exe from the Application
Server directory after your system has been
rebooted from the initial install.
CSCma21961 4
VB doesn’t support Fast Start
Inbound Option on Call
Manager
Note that this limitation does not change the
actual setup time, i.e., there is no adverse
effect. If H225FastStartInbound = true in
Service Parameters of Cisco Call Manager, the
call is dropped when routed via ISN to Cisco
Call Manager.
Workaround : Set H225FastStartInbound =
false (default setting) in Service Parameters of
Cisco Call manager.
CSCma22180 4
Queuing for consultative
transfers does not work until
CCM 3.3
Call is dropped with 3.2.x Call Manager if
queuing at ISN for consultative transfer.
Workaround: None
CSCma23584 4
Very Rare: Empty VXML
Instruction Error in VB logs
Very rarely, the ISN Voice Browser will log an
error message: ERROR INTERNAL: Empty
VXML instruction set... The call is
disconnected. This has been seen in
laboratory conditions on less than one call in
100000. There is no workaround.
 previous next