Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
INSTALLATION/OPERATION MANUAL GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W
PART #4521777 (03/19/08)Page 22
CONTROL PROGRAMMING (continued)
To Add NEW Menu Items
The following programming instructions serves as a GUIDE for
programming the basic settings for CLAM menu items.
1. PRESS and HOLD the button for approximately 3
seconds. Controller will display previously selected
menu item and its corresponding item number.
2. PRESS the or button until “Opt menu # - CLAM” is
displayed on the controller.
3. PRESS the button. The controller will display
“PRODUCT”
4. PRESS and HOLD the button. The currently select
menu item name will begin to flash.
5. To spell out the product name:
a. Use the or arrow buttons to scroll through
the character library.
b. PRESS or to scroll right or left.
c. PRESS the button to save the new menu item
name.
6. PRESS the button. “Display Active” will be displayed.
7. PRESS the button. “NO” will begin to flash.
8. PRESS the button. “NO” will change to “YES”.
9. PRESS the button to save the new setting.
10. PRESS the button. “GRILL SETPT” will be displayed.
11. PRESS the button. The temperature will begin to
flash.
12. Using the or button, change the temperature set
point to the new desired temperature.
13. PRESS the button to save the new temperature set
point.
14. PRESS the button. “PLATSETPT” will be displayed.
15. PRESS the button. The temperature will begin to
flash.
16. Using the or button, change the temperature set
point to the new desired temperature.
17. PRESS the button to save the new temperature set
point.
18. PRESS the button until “GAP MULTI/PR START”
appears in the display.
19. PRESS the button. The gap setting will begin to
flash.
20. Using the and DOWN button, change the gap
setting to the desired setting.
21. PRESS the button to save the new gap setting.
22. PRESS the button 2X to exit and return to the normal
operating mode.