Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
PART #4521777 (03/19/08)
GARLAND ELECTRIC CLAMSHELL GRILL WITH PRODUCT RECOGNITION MODEL MWE3W INSTALLATION/OPERATION MANUAL
Page 21
CONTROL PROGRAMMING (continued)
To change the grill upper platen set point temperature
NOTE: Grill temperature set points are preset in the controller to the
currently required standard. You should not change this set point to any
temperature other than what is shown on page 24.
1. Using the or button, select the menu item that
requires a temperature change.
2. PRESS and HOLD the button for approximately 3
seconds. Controller will display previously selected
menu item and its corresponding item number.
3. PRESS the button. The controller will display
“Product”.
4. PRESS the or button until “Platen SetPt” is
displayed on the controller.
5. PRESS the button. The “PLATEN SET POINT” will
begin to flash.
6. Using the or button, change the temperature set
point to the new desired temperature.
7. PRESS the button to save the new temperature.
8. PRESS the 2X to return to normal operating mode.
To Change the MUST REMOVE IN time
1. Using the or button, select the menu item that
requires a cook time change.
2. PRESS and HOLD the button for approximately 3
seconds. Controller will display previously selected
menu item and its corresponding item number.
3. PRESS the button. The controller will display
“Product”.
4. PRESS the or button until “Must Remove In” is
displayed on the controller.
5. PRESS the button. The seconds will begin to flash.
6. Using the or arrow buttons to change the Must
Remove In time to the new desired time.
7. PRESS the button to save the new time.
8. PRESS the 2X to return to normal operating mode.
To Change the Toast Buns time
1. Using the or button, select the menu item that
requires a cook time change.
2. PRESS and HOLD the button for approximately 3
seconds. Controller will display previously selected
menu item and its corresponding item number.
3. PRESS the button. The controller will display
“Product”.
4. PRESS the or button until “Toast Buns Time” is
displayed on the controller.
5. PRESS the button. The seconds will begin to flash.
6. Using the or button, change the Toast Buns Time
to the new desired time.
7. PRESS the button to save the new time.
8. PRESS the 2X to exit and return to normal operating
mode.
To Change the Toast Buns Alarm (Auto / Manual)
1. Using the or arrow buttons, select the menu item
that requires a cook time change.
2. PRESS and HOLD the button for approximately 3
seconds. Controller will display previously selected
menu item and its corresponding item number.
3. PRESS the button. The controller will display
“Product”.
4. PRESS the or button until “Toast Buns Alarm” is
displayed on the controller.
5. PRESS the button. The “AUTO” or “MANUAL” will
begin to flash.
6. Using the or arrow buttons to change the
“MANUAL” to “AUTO” or “AUTO” to “MANUAL”.
7. PRESS the button to save the new setting.
8. PRESS the 2X to exit and return to normal operating
mode.