Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
7
Use a clean paint brush and 50/50 soap and water solution. Use mild
soap and water.
▲▲
▲▲
▲ Do not use household cleaning agents. Damage
to gas train components can result.
LP Tank Exchange
• Many retailers that sell grills offer you the option of replacing your empty LP tank through
an exchange service. Use only those reputable exchange companies that inspect,
precision fill, test and certify their cylinders. Exchange your tank only for an OPD
safety feature-equipped tank as described in the "LP Tank" section of this
manual.
• Always keep new and exchanged LP tanks in upright position during use, transit or
storage.
• Leak test new and exchanged LP tanks BEFORE connecting to grill.
LP Tank Leak Test
For your safety
• Leak test must be repeated each time LP tank is exchanged or refilled.
• Do not smoke during leak test.
• Do not use an open flame to check for gas leaks.
• Grill must be leak checked outdoors in well-ventilated area, away from ignition
sources such as gas fired or electrical appliances. During leak test, keep grill away
from open flames or sparks.
Brush soapy solution onto the shaded areas.
Connecting Regulator To The LP Tank
OPD Hand
Wheel
Type 1 outlet with
thread on outside
Strap and Cap
Safety Relief
Valve
Off
Clockwise
1. LP tank must be properly secured onto
grill. (Refer to Assembly Manual)
2. Turn all control knobs including
sideburner (if featured) to the OFF
position.
3. Turn LP tank OFF by turning hand-
wheel clockwise to a full stop.
4. Remove the protective cap from LP
tank valve. Always use cap and strap
supplied with valve.
If "growing" bubbles appear do not use or move the LP tank. Contact an LP
gas supplier or your fire department!