Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
12
Ignitor Lighting Big Easy
▲▲
▲▲
▲ Do not lean over grill while lighting.
1. Open lid. Turn on gas at LP tank. Rotisserie grills only: Push in and turn Burner
Selector Knob to ON MAIN BURNERS.
2. Turn LEFT knob to HI.
3. Push IGNITOR Button rapidly, or hold, turn Ignitor Knob (up to 5
times) to light. Be sure burner lights and stays lit.
4. If burner does not light turn knob(s) to OFF, wait 5 minutes, try again.
Two Burners:
5. Turn RIGHT knob to HI to light second burner.
Three Burners:
5. Turn CENTER knob to HI and then RIGHT knob to HI.
6. If IGNITOR does not work, follow match lighting instructions.
After Lighting: Turn knob(s) to HI position for warm-up.
Rotisserie Burner Ignitor Lighting
1. Turn all knobs to OFF.
2. Open lid during lighting. Turn gas on at LP tank.
3. Push in and turn Burner Selector Knob to ON ROTISSERIE BURNER.
4. Press Ignitor Button or Electronic Ignitor button hold up to 4 seconds. Or turn
Ignitor Knob rapidly (up to 5 times). Be sure burner lights and stays lit.
5. If IGNITOR does not work, follow match lighting instructions above.
Match Lighting
1. Open lid. Turn on gas at LP tank.
2. Place lit match near porthole of burner.
3. Push in and turn Burner Selector Knob to ON ROTISSERIE
BURNER. Be sure burner lights and stays lit.
Note: Rotisserie burner and main burner cannot be used
at the same time
To match light use first
opening on burner
Match Lighting Big Easy
▲▲
▲▲
▲ Do not lean over grill while lighting.
1. Open lid. Turn on gas at LP tank.
Rotisserie grills only: Push in and turn Burner Selector Knob to ON MAIN
BURNERS.
2. Attach match to Match holder, light match
3. Push in and turn LEFT knob to HI. Be sure burner lights and stays lit.
Two Burners:
4. Turn RIGHT knob to HI to light second burner.
Three Burners:
4. Turn CENTER knob to HI and then
RIGHT knob to HI.
Match lighting hole
Left Side of Grill