Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
11
• Putting out grease fires by closing the lid is not possible. Grills are well
ventilated for safety reasons.
• Do not use water on a grease fire. Personal injury may result. If a grease
fire develops turn knobs and LP tank off.
• Do not leave grill unattended while preheating or burning off food residue on
high. If grill has not been regularly cleaned a grease fire can occur that may
damage the product.
Before Your First Cookout
• Light burners, check to make sure they are lit, close the lid and warm up grill on
HIGH for 15 minutes. Curing of paint and parts will produce an odor only on first
lighting.
Ignitor Lighting Traditional and Quick Set
▲▲
▲▲
▲ Do not lean over grill while lighting.
1. Open lid. Turn on gas at LP tank.
2. Turn LEFT knob to IGNITE.
3. Push IGNITOR Button rapidly, or hold, turn Ignitor Knob (up to 5
times) to light. Be sure burner lights and stays lit.
4. If burner does not light turn knob(s) to OFF, wait 5 minutes, try again.
5. Turn RIGHT knobs (if featured) to IGNITE to light other burner(s).
6. If IGNITOR does not work, follow match lighting instructions.
After Lighting: Turn knob(s) to HIGH position for warm-up. Do not warm up grill with knobs
on IGNITE. Knobs and handle will become uncomfortably hot if left in IGNITE positions.
Match Lighting Traditional and Quick Set
▲ ▲
▲ ▲
▲ Do not lean over grill while lighting.
1. Open lid. Turn on gas at LP tank.
2. Place lit match into match lighting hole from
outside grill bottom (as shown).
3. Push in and turn Single or RIGHT knob to
IGNITE. Be sure burner lights and stays lit.
4. Light left burner (if featured) by pushing LEFT knob
in and turning to IGNITE.
After Lighting: Turn Knob(s) to HIGH for warm-up.
Match
lighting hole
is in bottom
or side