Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Before you set the clock, you must have two
numbers clearly in mind.
The ‘’, which is the period of time you
want the oven to cook.
The ‘, which is the time of day you want
the oven to stop cooking.
You cannot set a start time directly - this is set
automatically by setting the cooking period and
stop time.
Turn the Timer knob to
the ( ) position.
Use the Adjusting knob to
set the ‘cooking time’ you
need.
Turn the Timer knob to
the ( ) position.
The display will show the
current time of day plus
the ‘cook period’ you just
set.
Use the Adjusting knob
to set the ‘Stop time’ you
need.
‘Stop Time’ shows. AUTO
will show in the display.
Set the oven(s) to the cooking temperature you
need (don’t forget to set a function if using the
Multi-function oven).
Turn the Timer knob to the (AUTO) setting.
When your cooking is finished the beeper sounds.
Turn the Timer knob to the vertical ( ) to return to
manual cooking.
If you are out, don’t worry about the beeper going
off, it stops after a while. When you return, turn the
Timer knob to the vertical ( ) position to return
to manual cooking. Turn the thermostat to the off
position.
You can cancel any automatic settings by turning
the Timer knob to the vertical manual symbol ( ).
When the key lock is activated, the clock can be
operated as usual but the ovens are locked and
will not come on. This means that your child could
select a cook program but the program will not be
activated and ovens will not switch on.
Make sure that the clock is in manual mode and
cancel any active programs.
Turn and hold the Timer
knob to the clock symbol
( ) for about 8 seconds.
‘On’ will appear on the
display.
Keep holding the Timer
knob turned to the clock
symbol ( ) and turn the
Adjusting knob clockwise
until the key symbol
( ) and ‘Of’ shows on the
display. Let go of the
knobs
The ovens are now
locked. After a few
seconds the display will
revert to show the time of
day and the key symbol.
Turn and hold the Timer
knob to the clock symbol
( ) for about 8 seconds.
‘Of’ will appear on the
display.
Keep holding the Timer
knob turned to the clock
symbol ( ) and turn the
Adjusting knob clockwise
until the key symbol
( ) goes out on the display
and ‘On’ shows. Let go of
the knobs.