Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
The grill pan and grid should be washed in hot
soapy water. After grilling meats or any foods that
soil, leave to soak for a few minutes in the sink
immediately after use. Stubborn particles may be
removed from the grid by using a nylon brush.
Alternatively the grill pan can be washed in a dish
washer.
To remove the grill pan support frame, pull the grill
pan forward.
Lift the grill pan clear of the support frame.
The support frame is held to the side rails by two
clips on each side.
For each side, support the side rail with one hand
and with the other hand lift the frame up and out of
the side clips.
For safety, push the side rails back into the grill
chamber.
The side rails can be
removed to make
cleaning the grill
chamber easer by
unhooking them from
the grill chamber sides.
Slides can be wiped clean with soft cloth and mild
detergent.
use any abrasive substance.
When you have finished, hook the side rails back
onto the sides of the chamber. To refit the frame
pull the side rails forward and for each side in turn
support the side rail and press the frame down into
the side rails. Replace the grill pan.
Avoid using any abrasive cleaners including
cream cleaners, e.g. Cif, on brushed Stainless Steel
surfaces. For best results use a liquid detergent e.g.
Domestos Multi Surface Cleaner.
The control panel and control knobs should only
be cleaned with a soft cloth wrung out in clean hot
soapy water. Wipe with a clean dampened cloth
then polish with a dry cloth. The oven doors should
only be cleaned with a soft cloth wrung out in clean
hot soapy water.