Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
27
FINISH WALL
FRAMING
1/4"
INSTALLATION OF NON-COMBUSTIBLE FACING MATERIALS TO THE FRONT FACE OF THE FIREPLACE
COMBUSTIBLE FRAMING
COMBUSTIBLE FRAMING
MEMBERS FACING MATERIAL
MEMBERS FACING MATERIAL
TO TOP OF SPACERS.
TO TOP OF SPACERS.
CAUTION:
CAUTION:
DO NOT COVER
DO NOT COVER
OR RESTRICT SIDE VENT
OR RESTRICT SIDE VENT
AREAS WITH SURROUND
AREAS WITH SURROUND
OR TRIM MATERIALS.
OR TRIM MATERIALS.
USE ONLY NON-COMBUSTIBLE
USE ONLY NON-COMBUSTIBLE
MATERIALS BELOW TOP OF SPACERS.
MATERIALS BELOW TOP OF SPACERS.
NON-COMBUSTIBLE
NON-COMBUSTIBLE
FACING MATERIAL
FACING MATERIAL
FIREPLACE FACE
FIREPLACE FACE
STEEL LINTEL
STEEL LINTEL
(OPTIONAL)
(OPTIONAL)
WARNING:
WARNING:
THE SPACE BETWEEN THE
THE SPACE BETWEEN THE
FACE OF THE FIREPLACE
FACE OF THE FIREPLACE
AND THE NON-COMBUSTIBLE
AND THE NON-COMBUSTIBLE
FACING MATERIAL MUST BE
FACING MATERIAL MUST BE
SEALED. FAILURE TO
SEALED. FAILURE TO
PROPERLY SEAL THIS CRACK
PROPERLY SEAL THIS CRACK
CAN CAUSE A POSSIBLE FIRE
CAN CAUSE A POSSIBLE FIRE
HAZARD AND WILL VOID THE
HAZARD AND WILL VOID THE
WARRANTY.
WARRANTY.
SCREENED OPENING
OF FIREPLACE
4"
(REF.)
EXTEND LINE FROM OPPOSITE REAR OF
FIREBOX THRU A POINT 4" IN FRONT OF
FIREPLACE FACE, AND 1" OUTSIDE OF
SCREENED OPENING.
OUTLINE OF
FIREPLACE
FIREBRICK
COMBUSTIBLE SURROUND
MATERIALS MAY BE PLACED
WITHIN SHADED AREAS.
NOTE: COMBUSTIBLE
MATERIALS MUST NOT
OVERLAP BLACK PAINTED
SURFACE MORE THAN 1/8".)
COMBUSTIBLE
FRAMING
MEMBERS
MAY BE
PLACED
ACROSS
TOP SPACERS.
12" MAX.
2 3/4" HOOD
(PART NO.
075629)
SIDE VIEW CUT-AWAY
FACING AND MANTEL CONSTRUCTION
075629 HOOD MUST
BE INSTALLED WHEN
MANTEL IS 12" FROM
FIREPLACE OPENING.
WHEN 075629 HOOD IS
INSTALLED GLASS DOORS
HAVE TO BE REMOVED.
12"
NOTE: NO COMBUSTIBLE
MATERIAL BELOW 12"
FROM OPENING
39 1/2"
44"
(MIN.)
48"
(MIN.)
1 1/2"
MAX.
COMBUSTIBLE
MANTEL AND/OR
TRIM MAY BE
PLACED WITHIN
THE SHADED AREA.
8"
TOP "V"
SPACERS
FLOOR
NON-COMBUSTIBLE
WALLBOARD
USE ONLY NON-COMBUSTIBLE MATERIALS BELOW
TOP OF SPACERS AND BEHIND FRONT FACE.
FINISH WALL
FRAMING
1/4"
1/4"
INSTALLATION OF NON-COMBUSTIBLE FACING MATERIALS TO THE FRONT FACE OF THE FIREPLACE
COMBUSTIBLE FRAMING
MEMBERS FACING MATERIAL
TO TOP OF SPACERS.
CAUTION:
DO NOT COVER
OR RESTRICT SIDE VENT
AREAS WITH SURROUND
OR TRIM MATERIALS.
USE ONLY NON-COMBUSTIBLE
MATERIALS BELOW TOP OF SPACERS.
NON-COMBUSTIBLE
FACING MATERIAL
FIREPLACE FACE
STEEL LINTEL
(OPTIONAL)
WARNING:
THE SPACE BETWEEN THE
FACE OF THE FIREPLACE
AND THE NON-COMBUSTIBLE
FACING MATERIAL MUST BE
SEALED. FAILURE TO
PROPERLY SEAL THIS CRACK
CAN CAUSE A POSSIBLE FIRE
HAZARD AND WILL VOID THE
WARRANTY.
SCREENED OPENING
OF FIREPLACE
4"
(REF.)
EXTEND LINE FROM OPPOSITE REAR OF
EXTEND LINE FROM OPPOSITE REAR OF
FIREBOX THRU A POINT 4" IN FRONT OF
FIREPLACE FACE, AND 1" OUTSIDE OF
SCREENED OPENING.
OUTLINE OF
OUTLINE OF
FIREPLACE
FIREPLACE
FIREBRICK
FIREBRICK
COMBUSTIBLE SURROUND
MATERIALS MAY BE PLACED
WITHIN SHADED AREAS.
NOTE: COMBUSTIBLE
MATERIALS MUST NOT
OVERLAP BLACK PAINTED
SURFACE MORE THAN 1/8".)
COMBUSTIBLE
FRAMING
MEMBERS
MAY BE
PLACED
ACROSS
TOP SPACERS.
12" MAX.
2 3/4" HOOD
(PART NO.
075629)
SIDE VIEW CUT-AWAY
FACING AND MANTEL CONSTRUCTION
075629 HOOD MUST
BE INSTALLED WHEN
MANTEL IS 12" FROM
FIREPLACE OPENING.
WHEN 075629 HOOD IS
INSTALLED GLASS DOORS
HAVE TO BE REMOVED.
12"
NOTE: NO COMBUSTIBLE
MATERIAL BELOW 12"
FROM OPENING
39 1/2"
44"
(MIN.)
48"
(MIN.)
1 1/2"
MAX.
COMBUSTIBLE
MANTEL AND/OR
TRIM MAY BE
PLACED WITHIN
THE SHADED AREA.
8"
TOP "V"
SPACERS
FLOOR
NON-COMBUSTIBLE
WALLBOARD
USE ONLY NON-COMBUSTIBLE MATERIALS BELOW
TOP OF SPACERS AND BEHIND FRONT FACE.
TRIM INSTALLATION
Wall ties should be fastened to the face of the fireplace with sheet metal screws and placed in the mortar joints
of masonry trim.
P
ART
C
OF
F
IGURE
31
SHOWS
ACCEPTABLE
COMBUSTIBLE
MANTEL
LOCATION
IF
FIREPLACE
IS
INSTALLED
TO
BURN
WOOD
. S
EE
F
IGURES
29
AND
30
FOR
ACCEPTABLE
COMBUSTIBLE
MANTEL
LOCATIONS
IF
AN
UNVENTED
GAS
APPLIANCE
IS
INSTALLED
IN
THE
FIREPLACE
. P
ARTS
A
AND
B
OF
F
IGURE
31
ARE
TYPICAL
FOR
EITHER
WOOD
OR
UNVENTED
GAS
APPLIANCE
INSTALLATION
.
FIGURE 31
PART A
PART B
PART C
53D9031. Rev 1 03/03
COMBUSTIBLE FRAMING
MEMBERS TO TOP OF SPACERS
COMBUSTIBLE SURROUND TRIM
COMBUSTIBLE MANTEL
TOP SPACER
**
*
TOP OF FIREPLACE OPENING
INSTALLATION OF COMBUSTIBLE TRIM MATERIALS
ABOVE THE TOP OF THE FIREPLACE OPENING
: 6" MINIMUM FROM TOP OF FIREPLACE OPENING TO BOTTOM OF
: 12" MINIMUM FROM TOP OF FIREPLACE OPENING TO BOTTOM OF
**
*
COMBUSTIBLE TRIM MATERIAL WHICH PROJECTS NO MORE THAN
1-1/2" BEYOND THE FACE OF THE FIREPLACE.
COMBUSTIBLE TRIM MATERIAL WHICH PROJECTS MORE THAN 1-1/2"
BEYOND THE TOP OF THE FIREPLACE OPENING.
12" MAX.