Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
[] Installing Side Shelf, Side Burner and Tool
Holder Kit
1.
Remove Side Burner from Side Burner Kit
before installing.
Enlisting the aid of an assistant, attach Side Burner
Frame to right side of grill. Attach Side Shelf to
left side of grill as shown in Figure 8a. Align
the 4 holes on Side Shelf and Side Burner Frame
with the threaded holes on left and right Bowl
Support Brackets. Tighten securely using 4 of the
1/4"x3/4" Pattern Head Screws provided.
2.
install the Side Burner Gas Valve Assembly to
the Side Bumer Frame. See Figure 8b. Attach
the Side Burner Gas Valve Assembly to the Side
Burner Gas Valve Hole on the Side Burner Frame,
as shown in Figure 8b. Align the 2 holes on
the Side Burner Frame with the threaded holes
on the Side Burner Gas Valve Bracket. Tighten
securely using 2 of M4x8mm Pattern Head
Screws and 2 Washers.
.
Cut Fastening Band from Side Burner Pot Support
and set Pot Support aside. Install the Side Burner
through the top hole in Side Burner Frame and
onto the Side Burner Gas Valve. Make sure that
opening at end of Side Burner Tube goes over
tip of Side Burner Gas Valve. Secure Side Burner
with supplied Cotter Pin. See Figure 8c or
Figure 8d. Place Pot Support into position on
Side Burner Frame.
4. install the Control Knob to the Side Burner Gas
Valve Stem. See Figure 8c or Figure 8d.
5.
For LP Gas grills:
Connect the Electric Wire terminal from Side
Burner with the other from Grill Head. Unscrew 1/
4" x 2" Pattern Head Screw from Right Cart Leg
and fix Wire Plug "A" into Wire Fastener. install
Wire Fastener to Right Cart Leg. Tighten securely
using the same screw. See Figure 8c.
Figure 8a
SIDE SHELF
GRILL HEAD
S_DE BURNER
FRAME
J
z
BOWL SUPPORT
BRACKET-RIGHT
Figure 8b
HOLES FOR SIDE BURNER GAS VALVE
M4x8mm
PATTERN HEAD
SCREW AND
WASHER
SIDE BURNER
FRAME
JSIDE BURNER GAS
VALVEASSEMBLY
_SIDE BURNER GAS
VALVE BRACKET
Figure 8c (LP gas model only)
SIDE BURNER
_/ POTSUPPORT
SiDE BURNER
CONNECTION
TUBE FROM_
GRILL HEAD
CONTROLKNOB
RIGHT CART
COTTERPIN
\
SIDE BURNER FRAME
J ELECTRIC WIRE
FROM GRILL HEAD
WIRE
FROM SIDE BURNER
_StDE BURNER GAS
VALVE ASSEMBLY
_FUEL GAUGE
WiRE PLUG"A"
17 WIRE FASTENER