Weber PL - PG. 59 57205 Gas Grill User Manual


  Open as PDF
of 84
 
WWW.WEBER.COM
®
11
IMPORTANT INFORMATION ABOUT LP GAS CONNECTIONS
TYPE 1 CONNECTIVE COUPLING
1
2
3
1
2
3
5
4
4 5
1 Type 1 Valve 4 Thermally Sensitive Nut
2 Hand Wheel 5 Propane Regulator
3 External Thread
WHAT IS A REGULATOR?
Your Weber
®
gas grill is
equipped with a pressure
regulator, which is a device to
control and maintain uniform
gas pressure as gas is
released from the LP cylinder.
REGULATOR CONNECTIONS
Each Weber
®
LP regulator is designed for vapor
withdrawal and is equipped with a UL-listed Type 1
cylinder connection as described in the latest edition of
ANSI Z21.58. THE LP CYLINDER THAT YOU CONNECT
TO THE REGULATOR MUST BE EQUIPPED WITH A
COMPATIBLE TYPE 1 CONNECTION IN THE CYLINDER
VALVE. This Type 1 connection allows you to make a fast
and safe hookup between your Weber
®
gas grill and the
LP cylinder.
NOTE: Gas will not ow from the cylinder unless the Type
1 coupling is fully engaged.
• ThepressureregulatorsuppliedwiththeWeber
®
gas
grill must be used. This regulator is set for 11 inches of
water column pressure.
• Replacementpressureregulatorandhose
assemblies must be those specied by Weber-
Stephen Products LLC.
• Besuretheregulatorismountedwiththesmallvent
hole pointed downward so that it will not collect water.
This vent should be free of dirt, grease, bugs, etc.
• ThegasconnectionssuppliedwithyourWeber
®
gas
appliance have been designed and tested to meet
100% of CSA and ANSI requirements.
m WARNING: Replacement LP cylinders
must match the regulator connection
supplied with this Weber
®
gas
appliance.
 previous next