Weber 300 Gas Grill User Manual


  Open as PDF
of 72
 
WWW.WebeR.com
®
35
Q300
PUSH-BUTTON IGNITION SYSTEM OPERATIONS
If the Push-Button Ignition System fails to ignite, be sure there is gas flow by
attempting to match light your burners. Refer to “MANUAL IGNITION”.
If match lighting is successful, the problem lies is the ignition system.
m WARNING: All gas controls and supply valves should be
in the OFF position.
• Checkthatbothignitionwiresareattachedproperlytoigniterelectrodes(1).
• Verifythattheignitionbuttonpushesin,clicksandreturnstotheoutposition.
If the ignition system still fails to light, contact the Customer Service
Representative in your area using the contact information on our web site.
Log onto www.weber.com
®
.
◆
1
1
Q320
ELECTRONIC IGNITION SYSTEM OPERATIONS
If the Electronic Ignition System fails to ignite, be sure there is gas flow by
attempting to match light your burners. Refer to “MANUAL IGNITION”.
If match lighting is successful, the problem lies is the electronic ignition system.
m WARNING: All gas controls and supply valves should be
in the OFF position.
• Checkthatboththeblack(1) and white (2) wires are attached properly to the
igniter electrodes on the ignition module.
• VerifythattheAAAbattery(alkalineonly)isingoodconditionandinstalled
correctly. Some batteries have a plastic protective wrap around them. This plastic
must be removed. Do not confuse this plastic with the battery label.
• MakesuretheElectronicIgnitionbuttonisworkingbylisteningandlookingfor
sparks at burner.
If the Electronic Ignition System still fails to light, contact the Customer
Service Representative in your area using the contact information on our web
site. Log onto www.weber.com
®
.
◆
1
2
mAINTeNANce
 previous next