Viking viking Gas Grill User Manual


  Open as PDF
of 18
 
22-15/16”
(58.3 cm)
16-5/8”
(80.2 cm)
10-1/4”
(26.0 cm)
6”
(15.2 cm)
50”
(127 cm)
8”
(20.3 cm)
5-3/8”
(13.7 cm)
32-3/4”
(83.2 cm)
31-9/16”
(80.2 cm)
3” min.
(7.6 cm) to non-
combustable
surface
24” min.
(61.0 cm) to
combustable
surface
VGBQ55404RE/VGIQ55404RE
10-1/8”
(25.7 cm)
36”
(91.4 cm)
**Access door opening
24-3/8”
(61.9 cm)
28-5/8”
(72.7 cm)
3”
(7.6 cm) min.
Electrical connection
for rotisserie motor
(position unit so that
the plug is always
accessible)
Electrical connection
for power supply cord on
300 Series to be located
on rear wall with a maximum
distance of 2’ (61.0 cm) beneath
solid bottom support.
*Solid bottom
support
Countertop typically requires
3/4” wide by 3/4” deep notch
cutout on each side of grill.
This allows grill CP to sit back
properly in the cutout.
Gas inlet and power cord
location area
5”
(12.7 cm)
5”
(12.7 cm)
3/4”
(
1.9 cm)
3/4”
(1.9 c
m)
17
Cutout Dimensions (100 and 300 Series 30”W. Grill)
**Access Doors sold separately - refer to
access door installation instructions for
correct dimensions.
*IMPORTANT
Cabinet cutout must have a solid bottom
to support the full weight of the unit.
16
Clearance Dimensions (500 Series 54”W. Grill)
 previous next