Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
10-1/4”
(26.0 cm)
36”
(91.4 cm)
**Access door opening
28”
(71.1 cm)
28-5/8”
(72.7 cm)
3”
(7.6 cm) min.
Electrical connection
for rotisserie motor
(position unit so that
the plug is always
accessible)
Electrical connection
for power supply cord on
500 Series to be located
on rear wall with a maximum
distance of 2’ (61.0 cm) beneath
solid bottom support.
*So
lid bottom
support
Countertop typically requires
1/2” wide by 1/2” deep notch
cutout on each side of grill.
This allows grill CP to sit back
properly in the cutout.
Gas inlet and power cord
location area
5”
(12.7 cm)
5”
(12.7 cm)
1/2
”
(
1.2 cm)
1/2
”
(1.2 c
m)
**Access Doors sold separately - refer to
access door installation instructions for
correct dimensions.
*IMPORTANT
Cabinet cutout must have a solid bottom
to support the full weight of the unit.
Cutout Dimensions (500 Series 30”W. Grill)
19
10-1/8”
(25.7 cm)
36”
(91.4 cm)
**Access door opening
24-3/8”
(61.9 cm)
35-1/4”
(89.5cm)
3”
(7.6 cm) min.
Electrical connection
for rotisserie motor
(position unit so that
the plug is always
accessible)
Electrical connection
for power supply cord on
300 Series to be located
on rear wall with a maximum
distance of 2’ (61.0 cm) beneath
solid bottom support.
*Solid bottom
support
Countertop typically requires
3/4” wide by 3/4” deep notch
cutout on each side of grill.
This allows grill CP to sit back
properly in the cutout.
Gas inlet and power cord
location area
5”
(12.7 cm)
5”
(12.7 cm)
3/4”
(
1.9 cm)
3/4”
(1.9 c
m)
Cutout Dimensions (100 and 300 Series 36”W. Grill)
18
**Access Doors sold separately - refer to
access door installation instructions for
correct dimensions.
*IMPORTANT
Cabinet cutout must have a solid bottom
to support the full weight of the unit.