Vanguard Managed Solutions BHDV34PB Outdoor Fireplace User Manual


 
15
106516
OWNER’S MANUAL
VENTING
INSTALLATION
Continued
HIGH ALTITUDE
INSTALLATION
Your Vanguard direct-vent fireplace has
been AGA tested and approved for eleva-
tions from 0-2000 feet and CGA certified
for elevations from 0-4500 feet.
When installing this fireplace at an elevation
above 2000 feet (in the USA), you may need
to decrease the input rating by changing the
existing burner orifice to a smaller size. Re-
duce input 4% for each 1000 feet above sea
level. Check with your local gas company for
proper orifice size identification.
When installing this fireplace at an eleva-
tion above 4500 feet (in Canada), check
with local authorities.
Consult your local gas company to help de-
termine the proper orifice for your location.
For assistance with any high altitude instal-
lation contact DESA International’s Tech-
nical Service Department at 1-800-DESA-
LOG (1-800-337-2564).
PARTS LISTS FOR VENTING
KITS AND COMPONENTS
Vanguard Rigid Venting
Number Description
BGFVK Basic Ground Floor Rigid Vent Kit
Includes: 7" x 60° Elbow, Extended
Adjustable Horizontal Termination,
Wall Thimble and 14 Screws
CVK Corner Vent Kit
Includes: 7" x 30º Elbow, 7" x 90º
Elbow, 7" Adjustable Galvanized
Pipe (7-12"), 6" Pipe, Wall
Thimble, Horizontal Termination,
RTV Silicone and 20 Screws
BVK Basement Rigid Vent Kit
Includes: 7" x 30° Elbow, 7" x 4'
Galvanized Pipe, 7" x 90° Elbow, 7"
Adjustable Galvanized Pipe (7-12"),
Wall Thimble, Horizontal Termi-
nation, RTV Silicone and 20 Screws
SVK Snorkel Rigid Vent Kit
Includes: 7" x 30° Elbow, 7" x 4'
Galvanized Pipe, 7" x 90° Elbow, 7"
Adjustable Galvanized Pipe (7-12"),
Wall Thimble, 36" Snorkel Termi-
nation, RTV Silicone and 28 Screws
Number Description
RVF Roof Rigid Vent Kit
Includes: Flue Restrictor, Storm
Collar, 7" x 30° Elbow, 7" x 4'
Galvanized Pipe, 7" x 2' Galva-
nized Pipe, 7" Adjustable Galva-
nized Pipe (7-12"), Firestop Sup-
port, Roof Flashing, RTV Silicone,
Vertical Termination, and 26 screws
D1000 7" x 12" Galvanized Coaxial
Pipe (6 pcs.)
D1010 7" x 24" Galvanized Coaxial
Pipe (6 pcs.)
D1020 7" x 48" Galvanized Coaxial
Pipe (6 pcs.)
D1030 7" Adjustable (7-12")
Galvanized Coaxial Pipe
(6 pcs.)
D1050 7" x 6" Galvanized Coaxial
Pipe (6 pcs.)
D2000 7" x 90° Elbow (6 pcs.)
D2010 7" x 45° Elbow (6 pcs.)
D2020 7" x 30° Elbow (6 pcs.)
D2030 7" x 60° Elbow (6 pcs.)
D3000 Wall Strap/Offset Support
(6 pcs.)
D3010 Storm Collar (6 pcs.)
D3020 Wall Thimble (6 pcs.)
D3040 Vertical Vent Termination Cap
D3050 Vertical Restrictor (6 pcs.)
D3060 Ceiling Firestop/Support
(6 pcs.)
D3070 Rectangular Horizontal Rigid
Vent Termination Cap
D3071 Adjustable Horizontal Rigid
Vent Termination Cap
D3090 Cathedral Ceiling Support Box
D4000 Roof Flashing 6/12-9/12
D4010 Roof Flashing 9/12-12/12
D5000 Wood/Vinyl Siding Standoff
(6 pcs.)
SIMPSON DURA-VENT
GS 4" x 6
5
/8 "
Number Description
Available from DESA International:
SD2040 Simpson Dura-Vent GS
30° Elbow (6 pcs.)
SD2050 Simpson Dura-Vent GS
60° Elbow (6 pcs.)
Available from Simpson Dura-Vent only:
902 7" x 48" Pipe
903 7" x 36" Pipe
904 7" x 24" Pipe
906 7" x 12" Pipe
907 7" x 9" Pipe
908 7" x 6" Pipe
911 7" Adjustable (11"-14
5
/8") Pipe
940 Wall Thimble
941 Cathedral Ceiling Support Box
943 Roof Flashing 0/12-6/12
943S Roof Flashing 7/12-12/12
945 7" x 45° Elbow
950 Vinyl Siding Standoff
953 Storm Collar
963 Ceiling Firestop
981 36" Snorkel Termination
984 Horizontal Termination Vent Cap
988 Wall Strap
990 7" x 90° Elbow
991 Vertical High Wind Termination
Vanguard Flexible Venting
(Cont.)
Number Description
BFGFVK Basic Flex Ground Floor Vent Kit
Includes: Flex Adapter, 7" x 2'
Flexible Pipe, 4" x 2' Flexible
Pipe, Wall Thimble, Horizontal
Termination, (2) Spacer Springs,
(2) 4" Hose Clamps, (2) 7" Hose
Clamps, and 10 Screws
Vanguard Rigid Venting
(Cont.)
Vanguard Flexible Venting
Number Description
FGFVK Flex Ground Floor Vent Kit
Includes: Flex Adapter, 7" x 4'
Flexible Pipe, 4" x 4' Flexible Pipe,
Wall Thimble, Horizontal Termi-
nation, (4) Spacer Springs, (2) 4"
Hose Clamps, (2) 7" Hose Clamps,
RTV Silicone, and 10 Screws
D1040 7" x 25' Coaxial Flex Pipe
with Spacer Springs
D3080 Rectangular Horizontal
Flex Termination Cap
D4020 Flex Connector (6 pcs.)
D4030 Flex Wall Thimble (6 pcs.)
D4040 4" Hose Clamp (6 pcs.)
D4050 7" Hose Clamp (6 pcs.)