Taylor 811 Gas Grill User Manual


 
31
Model 811, 813, 819, 821 Series Operating Procedures
120524
Step 6
Remove the release sheet clip, release sheet
retainer, and the release sheet. Take these parts to
thesinktobewashedandrinsed.
Figure 49
Step 7
Repeat steps 1 through 6 for the remaining upper
platen(s).
Step 8
Wash and rinse the clips and retainers in the sink.
Set them aside for future use.
Step 9
Set the release sheets aside on a clean, flat surface
next to the sink until further cleaning is performed.
DO NOT fold, crease, or place them on sharp
objects.
Figure 50
Step 10
Scrape the lower grill surface with the grill scraper,
from front to back.
Figure 51
Step 11
Use the wiper squeegee to push residual grease into
thegreasecans.
Figure 52
Step 12
Remove, empty, and reinstall the grease cans.
Figure 53