Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
18
Model 811, 813, 819, 821 SeriesOperating Procedures
130205
Step 4
Place the release sheet clips over the release sheet.
Press them into place over the release sheet bar at
the top of the platen.
Figure 14
Step 5
Check the tightness of the release sheet against the
upper platen.
Figure 15
Note: Installing the release sheets too tightly may
cause premature failure of the sheet.
Step 6
Repeat steps 1 through 5 for the remaining upper
platen(s).
Note: Temperature checks should only be
conducted with the release sheets removed.
Replace the release sheet when:
S Cleaning procedures fail to remove all
buildup and product sticks to the release
sheet.
S A tear appears in the cooking area of the
release sheet, causing product to stick to the
release sheet.
Figure 16
CAUTION: The upper platen surface and
release sheet are very hot. To prevent burn
injuries, wear heat-resistant gloves when
replacing t he release sheets.
Note: It is not necessary to change the release
sheet if small pin holes develop on the sheet.