Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
13
Regency I31-3 Gas Fireplace Inbuilt
11) Mount the cast faceplate panels onto the insert body, sliding the
side filler brackets into the space between the glass and the
firebox. Secure using the 4 remaining black screws, 2 per side.
12) Install the glass trim by inserting the side hooks on the glass trim
into the 4 slots between the faceplate and the glass. Push the glass
trim down firmly with both hands to lock into place.
Slide side filler
bracket into gap
between glass and
fire box.
Side Hook
Slots
INSTALLATION
13) To put on the Regency logo, peel the sticker from the back of the
logo and place it centered on the bottom left hand corner of the
faceplate.
Regency Logo
Left Hand
Side Faceplate
HAMPTON CAST
GRILL INSTALLATION
Note: The top louver should be placed
with the curved cut-out facing up.
Before the grills are installed, a grill stop bracket needs to be put in
place.
1) The grill stop bracket is installed in the bottom left corner just under
the firebox with the screw supplied as shown below.
Grill Stop
Bracket
2) Place top grill into brackets located inside top of firebox as shown.
Bracket inside
top of firebox.
Bracket
Top Grill
3) The bottom louver, shown in the diagram below, has 2 hinges that
are attached to the lip on bottom of the unit. Secure using 2 screws
per hinge.