Hearth and Home Technologies CARDOG42I Outdoor Fireplace User Manual


 
Outdoor Lifestyles by Hearth & Home Technologies Inc. • Carolina • 4066-300 • Rev. Q • 7/11 16
Disconnect the battery holder wires from the red and black
wires of the wiring harness from the switch and module.
Connect the red and black wires of the wiring assembly
included with the electric kit to the red and black wires to
the switch and module. Plug the power supply wire into
the wire assembly and then into the outlet. Refer to
Figure 6.1.
LOAD
LINE/
LIGNE
HOT
/TENSION
WHITE
/NEUTRE
HOT
/TENSION
WHITE
/NEUTRE
STRIP GUAGE
GABARIT DE DENUDAGE
O
T
/TENSI
O
HIT
E
/NEU
T
H
T
O
W
Grounding connection
to box (if box has a
grounding terminal)
Wire
connector
Junction
box
LINE cable brings
power to the GFCI
Yellow sticker remains
in place to cover the
LOAD terminals
Figure 6.9 Wire the GFI Receptacle
Wire the GFI receptacle as shown below:
Assemble the junction box.
Figure 6.10 Assemble Junction Box
Figure 6.11 Replace Control Cover
Replace the cover on the control box.