Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Setup
3A1214B 9
Filter Orientation
After mounting and securing the RoadPak to the vehicle,
position the filter assemblies as desired.
1. Use a hammer to loosen the large jam nut on the
pump assembly.
2. Rotate the filter assembly to the desired orientation
and use a hammer to tighten the jam nut and lock
the assembly into place.
Gun Arm Bracket Mount
Single Hitch Mounting Bracket (24G626)
Installation (Option 1)
1. Install hitch insert bracket (A) into receiver (C).
Ensure hitch pin (B) goes through tightening rod
hole (D).
2. Tighten nut until the hitch insert bracket is pulled
securely to the receiver and no play is seen
between the two parts.
3. Install the height adjustment bracket (303) to the
hitch insert bracket with bolts (312), washers (307),
and nuts (315). Ensure the height adjustment
bracket is installed level.
4. Install stow bracket (302) to height adjustment
bracket (303) with bolts (312), washers (307), and
nuts (315). Locate the bottom of the stow-bracket
21-in. to 25-in. (53cm - 63cm) from the ground.
Ensure the stow-bracket is installed level.
ti16782a
ti16784a
ti16783a
ti15839a
ti15955a
ti16648a
AC
D
B
ti16785a
ti15956a
315
307
307
312
303
ti15957a
21 in. - 25 in.
(53 cm - 63 cm)
302
315
302
307
312