Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Setup
16 3A1214B
Hose Routing
1. Pull slide beam out to one side of the vehicle. Pull
gun arm out and lower it to make sure the hose bun-
dle has been secured at the proper location to
ensure full movement for the gun arm to move from
one side to the other. Make adjustments to the hose
clamp that secures the bundle as needed.
2. Lift gun arm back to the stow position. Pull slide
beam out to other side of vehicle and pull the gun
arm to that side to ensure the hose length is ade-
quate for full movement.
3. Put gun arm back to the stow position and pin it into
place. Center the slide beam to the vehicle. Lock the
slide beam and gun arm into place by engaging the
clamps for each.
Hose Connection
1. Install suction tubes to the RPS 2900 pump and
route to paint drum.
2. Install return line from the RPS 2900 filter assembly
and route back to the paint drum.
3. Install paint lines to RPS 2900 filter assemblies. For
a two color system, route the hose from paint gun 1
to pump 1 and route one hose from paint gun 2 to
pump 1. Route the second hose from paint gun 2 to
pump 2.
4. Install bead lines to the bead tank.
ti16658a
ti16655a
ti15954a
ti16444a
ti16445a
ti16597a
ti16446a
ti16598a