Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Introduction and General Information
3A1214B 5
Introduction and General Information
Introduction
This manual and those listed below provide pre-setup
requirements, parts lists, setup, operation, and mainte-
nance instructions for the RoadLazer system. This man-
ual includes instructions for a 2-pump system. For
1-pump systems, all parts remain the same with the
exception of plugged ports for missing pumps and
hoses.
General Information
The RoadLazer is mounted to a vehicle and is used to
stripe up to two stripes in one or two colors with glass
beading.
The RoadLazer consists of a Programmable Skipline
Controller, Displacement Pumps, two Paint Spray Guns,
and two Bead Spray Guns.
Programmable Skipline Controller
The Programmable Skipline Controller consists of the
control box and a 30 ft cable. It is the main control for the
RoadLazer system and turns the spray guns and acces-
sories on and off.
Front Guidance System
The Front Mechanical Guidance System provides the
user with a pointer for alignment on either the left or right
side of the vehicle.
Video Guidance System
™
(optional)
The Video Guidance System provides the user with
video of a bore sight view for alignment on either the left
or right side of the tow vehicle. The system consists of a
9 in. monitor, interfacing cables, video camera and
mounting bracket.
RPS 2900 Hydraulic Pumps
The RPS 2900 Hydraulic Pump supplies paint to the
spray guns. There are two displacement pumps. Two
displacement pumps allows the user to have a two-color
system.
Paint Spray Guns
The Paint Spray Guns are pneumatically triggered to
spray paint stripes when commanded by the Program-
mable Skipline Controller.
Bead Spray Guns
The Bead Spray Guns are pneumatically triggered to
spray reflective materials when commanded by the Pro-
grammable Skipline Controller.