Graco 3A1214B Gas Grill User Manual


  Open as PDF
of 28
 
Operation
3A1214B 21
3. Check engine oil level. Add SAE 10W-30 (summer)
or 5W-20 (winter), if necessary.
4. Fill fuel tank.
5. Check hydraulic oil level. Add only Graco Hydraulic
Oil, ISO 46 169236 (5 gallon/18.9 liter) or 207428 (1
gallon/3.8 liter). Hydraulic tank capacity is approxi-
mately 4.0 gallons (15.14 liters).
6. Check oil level in compressor. NOTE: If red dot is
visible, add oil.
7. Verify all hose/fitting connections are tight.
8. Turn hydraulic lines to closed position.
9. Turn pump lever by guns clockwise 1/4 turn to OFF
position.
10. Place suction tube and drain tube in grounded metal
pail partially filled with flushing fluid. Attach ground
wire to pail and to earth ground.
11. Turn prime valve down.
12. Install clean inlet strainer. NOTE: There must be a
minimum of 0.5 in. between bottom of strainer and
suction tube.
13. Turn pressure control counterclockwise to lowest
pressure.
(cold)
ti16447a
Safe Range (cold)
ti5243a
ti16789a
ti15838a
ti15953a
ti16547a
ti16552a
ti16553a
0.5 in.
ti16919a
 previous next