Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Setup
3A1214B 13
5. Install stow-bracket (302) to height adjustment
bracket (303). Locate the bottom of the stow-bracket
21 in. to 25 in. (53cm - 63cm) from the ground.
Ensure the stow-bracket is installed level.
NOTE: It is recommended to bolt the mounting
bracket through the bed of the vehicle to the frame
of the vehicle.
Slide Beam Installation (24G630)
The slide beam is 87.75 in. (2.2m) long. The Slide Beam
is shipped to accommodate wider vehicles. The beam
can be cut down to 75.75 in. (1.9m) long or 60 in. (1.5m)
long to accommodate different vehicle sizes.
1. To shorten the beam to 75.75 in. long, cut 12 in.
from the end the beam towards the next hole on the
beam. To shorten the beam to 60 in., cut 27.75 in.
from the end of the beam towards the third hole as
shown below.
2. After determining the desired length, slide the beam
into the bracket on the channel.
Gun Arm Installation (24G628, 24G629)
1. Position the gun arm assembly next to the vehicle.
2. Pull the slide beam out to the side of the vehicle
where the gun arm is located. Lift the gun arm and
hold the traverse bracket in the position shown
below. Slide the beam through the wheels so they
are mounted on the track of the slide beam as
shown below.
ti16787a
21 in. - 25 in.
53 cm - 63 cm
ti16960a
302
ti16916a
ti16600a
12 in.
27.75 in.
ti16647a
ti15959a