Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
11
INSTALLATION INSTRUCTIONS
SITE REQUIREMENTS
2
AR0184
A
B
D
C
E
50mm (2")
Flue Type
Dimension
Brick Built
Class 1
Pre Fab Metal
Box
Pre Cast
from 1986
A 410 407 305
B 560 560 560
C 250 200 215
D 300 300 300
E 150 150 150
2.4 Ensure that no naked flame or incandescent part of the fire
bed projects beyond the vertical plane of the fireplace
opening.
2.5 The appliance must not be installed in any room that
contains a bath or shower.
2.6 Ensure clearances to combustible materials - see diagram 3
3
AR0707
3. GAS SUPPLY
3.1 Before installation, ensure that the local distribution
conditions (identification of gas and pressure) and
the adjustment of the appliance are compatible.
3.2 Ensure that the gas supply is capable of delivering the
required amount of gas, and is in accordance with the rules
in force.
3.3 This appliance is supplied complete with a factory fitted
isolation device incorporated into the inlet connection, no
further isolation device is therefore required.
4. VENTILATION
It is important to ensure that any national ventilation
requirements are taken into account during the
installation of this appliance.
4.1 This appliance has a nominal input not exceeding 7.0kw
and therefore does not normally require ant additional
permanent ventilation.
If, however, spillage is detected when commissioning the
appliance, there may be insufficient natural ventilation and
additional ventilation may be required.
For ventilation requirements in the Republic of Ireland, it
will be necessary to refer to the relevant rules in force.
AIR VENTS MUST NOT BE RESTRICTED.