Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Part # 4526884 Rev 4 (10/08/10) Page 19
• Remove the grease trough
from each side. Empty and
replace.
• Apply the grill cleaner
to front side of platens
starting from right platen
to left platen.
• DO NOT SCRUB
• Apply the grill cleaner to
platen surfaces starting
from right platen to left
platen.
• DO NOT SCRUB
• Apply the grill cleaner to
back side of platens from
right platen to left platen.
• DO NOT SCRUB
• Select Clean Mode.
When Clean Mode has
been reached, the LED
indicators will turn GREEN
• Wipe the Release Material
sheets with a clean,
sanitizer-soaked grill cloth.
• Remove the locking clips,
bars, and release sheets.
Wash, rinse, and set aside
to dry.
• Set release sheets aside on
a at surface.
• Scrape the lower grill
surface with the scraper.
• Use the grill squeegee to
push residual grease into
trough.
• Wash and rinse the
squeegee and scraper
• Apply the grill cleaner to
outer edges of right and
left platens.
• DO NOT SCRUB
• Press green & black
buttons to lower the
center platen.
• Apply grill cleaner to inner
edges of the right and left
platens, and the edges of
the center platen.
• DO NOT SCRUB
• Press green button to raise
center platen.
• Apply grill cleaner to
bottom grill surface.
• Spread the cleaner over
the entire lower grill
surface from front to back
using even strokes.
• DO NOT SCRUB
• Rinse platen surfaces with
a clean, sanitizer-soaked
grill cloth, starting from
right to left platens.
• Press green & black
buttons to lower the
center platen.
CLEANING AND MAINTENANCE continued