Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
www.desatech.com
113111-01E 25
TROUBLESHOOTING
Continued
1. Residues from manufacturing
processes
1. Turning control knob to HI
position when burner is cold
2. Air in gas line
3. Air passageways on replace
blocked
4. Dirty or partially clogged
burner orice
1. When heated, vapors from
furniture polish, wax, carpet
cleaners, etc. may turn into
white powder residue
1. Metal expanding while heating
or contracting while cooling
REMEDY
1. Problem will stop after a few
hours of operation
1. Turn control knob to LO
position and let warm up for
a minute
2. Operate burner until air is re-
moved from line. Have gas line
checked by local propane/LP
gas company
3. Observe minimum installa-
tion clearances (see pages 9
through 12)
4. Clean burner (see Cleaning
and Maintenance, page 22)
or replace burner orice
1. Turn heater off when using
furniture polish, wax, carpet
cleaners, or similar products
1. This is normal with most
replaces. If noise is exces-
sive, contact qualied service
person
Slight smoke or odor during
initial operation
Fireplace produces a whistling
noise when burner is lit
White powder residue forming
within burner box or on adjacent
walls or furniture
Fireplace produces a clicking/
ticking noise just after burner
is lit or shut off