Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
29
CART ASSEMBLY INSTRUCTIONS
IMPORTANT:
THE CART MUST BE ASSEMBLED BEFORE ANY GAS CONNECTION CAN BE MADE.
TOOLS REQUIRED (not included):
Phillips Head Screwdriver.7/16”Wrench or Socket,Protective Gloves To Be Worn
BEFORE ASSEMBLING THE CART:
STEP 1:
Remove packaging
a) Cut shrink wrap and banding material off.
b) Remove top cardboard tray and cardboard corners and then cut bottom tray to allow cart to be rolled out.
c) Recycle packaging.
STEP 2:
Remove side shelves and side trays from inside and discard bubble wrap.
STEP 4:
Attach the side shelf on the right side (left side is optional side burner location)
a) Attach shelf to the right side
of the cart using 1/4 nuts and
bolts provided [leave out (1)
bolt as shown].
b) Do not tighten bolts
(finger tight only) until
completing Step 5-E.
Leave this bolt
out until Step 5
STEP 3:
Part list included
P
art No. Description Quantity
1) 10348 Bag, Hardware,Self adhesive (1)
2) 17726 Assemby instructions BGB Cart (1)
3) 15001-23 Machined Philip screws 10x24x1/2(Use for Step 5 and Step 6) (5)
4) 15003-06 Hexbolt 1/4x20x1/2 (Use for Step 4) (5)
5) 15021-09 Nut Hex 1/4–20 (Use for Step 4) (5)
6) 15147 (1/4–20) 2”bolt (Use for Step 5) (2)
Keps
nuts
and
bolts