Cal Flame BBQ10900 Gas Grill User Manual


  Open as PDF
of 32
 
6
Installation / Assembly
Hibachi Grill
LTR50001096, Rev. A
www.calamebbq.com
LP Gas
Tank Requirements
For plumbed-in LP installation, use a convertible regulator and set it
for LP gas.
Maximum line pressure for plumbed-in propane is 14” WC (3.5 kPa).
Minimum line pressure for propane is 11” WC.
The grill unit must be used with the gas pressure regulator. The regula-
tor will control and maintain a uniform gas pressure in the manifold.
The burner orices have been sized for the gas pressure delivered by
the regulator.
WARNING: Attempting to operate the grill unit without the gas regu-
lator installed could cause an explosion and possible death.
Cylinder Specication
Any LP gas supply cylinder used with this grill must be:
Constructed and marked in accordance with the • Specications
for LP-Gas Cylinders of the U.S. Department of Transportation
or the National Standard of Canada, CAN/CSA-B339, Cylin-
ders, Spheres and Tubes for Transportation of Dangerous
Goods; and Commission, as applicable.
Approximately 12 inches in diameter and 18 inches high.•
 previous next