Cal Flame BBQ10900 Gas Grill User Manual


 
Appendix
23
Hibachi Grill
LTR50001096, Rev. A
www.calamebbq.com
Problem: Plugged orice
Solution: Unplug the orice as follows:
Remove griddle and grease tray.
Remove burners from the bottom of the rebox by
pulling the cotter pin from beneath the burner peg
using a standard screwdriver or needle nose pliers.
Carefully lift each burner up and away from the gas
orice.
Remove the orice from the control valve.
Gently clear any obstruction with a ne wire.
Reinstall the orice, reinstall the burners over the
orices, and seat each burner peg into position hole
at the bottom ledge of the rebox.
Replace all cotter pins.
Replace cooking components and grease collectors.
If an obstruction is suspected in the control valve, con-
tact your local Cal Flame dealer for assistance.
Problem: Burner tube is misaligned over the orice
Solution: Reposition the burner tube so that it is properly seated
over the orice.
Problem: Obstruction in the gas line
Solution: Remove the fuel line from grill. (Do not smoke or per-
form any maintenance in the vicinity of an open ame.)
Open the gas valve for one second to blow out any de-
bris. Close off the gas valve and reconnect the fuel line
securely.