Cal Flame BBQ10900 Gas Grill User Manual


  Open as PDF
of 32
 
Safety Instructions
1
Hibachi Grill
LTR50001096, Rev. A
www.calamebbq.com
Placement and Location
The Cal Flame hibachi grill is designed for outdoor use only.
Never locate this appliance in an enclosed room, under a sealed •
overhead structure, or in any type of enclosed area such as a ga-
rage, shed, or breezeway. Keep clear of trees and shrubs.
Do not place this grill under or near windows or vents that can be •
opened into your home.
Cal Flame hibachi grills are not intended for installation in or on •
recreational vehicles or boats.
Maintain sufcient distance as to not overheat any overhead com-•
bustible material such as a patio cover.
The area surrounding your new hibachi grill should be kept clean •
and free from ammable liquids and other combustible materials
such as mops, rags or brooms, as well as solvents, cleaning uids,
and gasoline.
Do not use the hibachi grill or area surrounding the grill as a stor-•
age area for ammable or plastic items. Do not store the liquid
propane (LP) cylinder in the vicinity of this or any other appliance
when it is not being used.
Set-Up
Before installing a built-in hibachi grill in an enclosure, copy all •
product information such as model number, serial number and gas
type (LP) to page 30 of this manual. This information is located on
a plate located on the right side of the chassis.
We recommend that a licensed contractor install your Cal Flame •
hibachi grill. Installation must conform to local codes, or in the
absence of local codes, with either the National Fuel Gas Code,
ANSI Z223.1 / NFPA54, Natural Gas and Propane Installation
Code, CSA B149.1, or Propane Storage and Handling Code,
B149.2), as applicable.
To prevent re and smoke damage, remove all packaging material •
before operating your hibachi grill.
Safety Instructions
WARNING: Improper installation, adjustment, alteration,
service or maintenance can cause injury or property damage. Read
the installation, operating and maintenance instructions thoroughly
before installing or servicing this equipment.
 previous next