Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
99-00962-20 REV C0
19 | MODEL FSSBID 100: CONNECTING DEVICES INSIDE YOUR SMART MOBILE
STAND’S CABINET
To connect your
flat-panel display
1. Connect speaker cables A02 and A03 to your flat-panel display’s
speaker receptacles.
2. Connect the VGA video plug from cable AV01 to your flat-panel display’s VGA
video receptacle.
NOTE
If your flat-panel display has more than one VGA video receptacle, use
the receptacle adjacent or closest to a 3.5 mm audio receptacle.
3. Connect the 3.5 mm stereo audio plug from cable AV01 to an audio receptacle
on your flat-panel display’s connection panel. Typically, this audio receptacle
is beside the VGA connection.
4. Connect the 3.5 mm stereo audio plug from cable A01 to a second audio
receptacle on your flat-panel display’s connection panel.
NOTE
If your flat-panel display’s connection panel has only one 3.5 mm audio
receptacle, contact your authorized SMART reseller
to purchase
a 3.5 mm audio Y-adapter cable.
5. Connect cable V01 as follows:
– Connect the red BNC plug to the red BNC receptacle on your flat-panel
display’s connection panel. This receptacle is typically labeled R.
– Connect the green BNC plug to the green BNC receptacle on your flat-panel
display’s connection panel. This receptacle is typically labeled G.
– Connect the blue BNC plug to the blue BNC receptacle on your flat-panel
display’s connection panel. This receptacle is typically labeled B.
– Connect the white BNC plug to the white BNC receptacle on your flat-panel
display’s connection panel. This receptacle is typically labeled H.
– Connect the yellow BNC plug to the yellow BNC receptacle on your flat-panel
display’s connection panel. This receptacle is typically labeled V.
6. Connect cable AV02 as follows:
– Connect the yellow plug to the yellow RCA receptacle on your flat-panel
display’s connection panel. This receptacle is typically labeled V or VIDEO.
– Connect the red plug to the adjacent red RCA receptacle on your flat-panel
display’s connection panel. This receptacle is typically labeled R.
– Connect the white plug to the adjacent white RCA receptacle on your
flat-panel display’s connection panel. This receptacle is typically labeled L.