Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
2-72
Cisco Internet OSS for VoIP: Infrastructure Manager Implementation Guide
OL-2706-01
Chapter 2 Provisioning
Step by Step Installation and Initial Configuration
Version 6.4.8
CNS INTEGRATION BUS is up
Note If the Cisco CNS IE2100 appliance and the Cisco PTC Server machine are in different subnets,
you must configure the Cisco CNS Integration Bus and Cisco CNS IE2100 appliance as
described in the “Post Installation Configuration” section, prior to performing the following
steps.
Step 5 Verify the Cisco CNS Integration Bus is running:
ptc-tme% ps -ef | grep rvrd
vnm 2186 1 0 15:55:27 ? 0:00
/opt/cisco/vnm/common/tibrv/bin/rvrd -store
/opt/cisco/vnm/common/tibrv/bin/rvr
Step 6 If it isn't running (the rvrd daemon was not found), go back to the last step and start it again.
Starting the Cisco PTC Server Processes
Step 7 Go to the /opt/cisco/vnm/topodisc directory:
ptc-tme% cd /opt/cisco/vnm/topodisc
Step 8 Add the network devices to the Cisco PTC Network Information Seed File (NISF) through the
Cisco PTC Seed File Editor.
Refer to the “Cisco PTC Network Information Seed File” appendix in the Cisco Packet Telephony Center
User Guide for a detailed description of how to add the network devices to the NISF through the
Cisco PTC Seed File Editor.
Step 9 Go to the /opt/cisco/vnm/topology directory and edit the LocalStrings.properties file as follows:
a. If you plan on connecting from the Cisco PTC Server machine to the machine where the Carrier
Sensitive Router (CSR) application is running, you must ensure the props.naboo_prompt variable is
set to the default prompt that is used by the machine where CSR is running (the prompt you receive
when you log in to the CSR machine).
b. If you plan on connecting from the Cisco PTC Server machine to the machine where the Cisco Info
Center (CIC) application is running, you must ensure the props.cic_prompt variable is set to the
default prompt that is used by the machine where CIC is running (the prompt you receive when you
log in to the CIC machine):
ptc-tme% pwd
/opt/cisco/vnm/topology
ptc-tme% ls
LocalStrings.properties images topology.dtd
topology.xml
WEB-INF resources topology.jar
topoview.html