Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
2-24
Cisco Internet OSS for VoIP: Infrastructure Manager Implementation Guide
OL-2706-01
Chapter 2 Provisioning
Step by Step Installation and Initial Configuration
The variable parameters are the IP address of the Cisco CNS IE2100 appliance (172.19.49.20), the
communication port (80), the keep alive time (100 seconds), and the retry count (30).
There are several ways for this to happen. The method of choice in this chapter is to do it through the
Cisco PTC Topology Manager. If the elements are included in the Cisco PTC Network Information Seed
File for discovery or added through the Cisco PTC Topology Manager, the commands are entered into
the devices by Cisco PTC.
Installing Cisco MGC Node Manager (including VSPT, CiscoView, and CEMF)
Successful network management using Cisco MGC Node Manager (CMNM) begins with a well-planned
and carefully executed installation. Network element management involves many interdependent
factors, including:
• the correct hardware for your environment
• the correct software release and patch levels on the managed devices
• the correct installation of Cisco Element Manager Framework, the foundation software for CMNM.
To organize the installation process, use the Planning and Installation Checklist below to plan and carry
out your installation. Begin by reading it over to understand the major tasks in a successful installation
and check off each task as completed.
Planning and Installation Checklist
Procedures for completing each task are described in the sections that follow.
Before you begin, be familiar with each product’s Release Notes document. The Release Notes
supplement and, when different, take precedence over the information provided in this document.
1. Gather installation software and required information.
2. Determine hardware requirements for your environment.
3. Ensure the network devices have the correct software.
4. Ensure the Sun Solaris operating system is installed on your server.
5. Partition the hard drives when you install the OS.
6. Install the recommended patch cluster for Solaris 8.
7. Obtain a Cisco EMF license.
8. Check system prerequisites. (DNS)
9. Install the Cisco MGC Host Voice Services Provisioning Tool.
10. Install Cisco EMF 3.2 and any necessary patches.
11. If you plan to use raw file systems, configure raw file systems in ObjectStore.
12. Install and verify CMNM 2.1 and any necessary patches.
Gathering Installation Software
Your order of CMNM includes three product CDs:
1. Cisco Element Management Framework 3.2 on the first CD. The software includes ObjectStore 5.1
Service Pack 2, which provides database management. Go to the Release Notes and the latest Cisco
EMF 3.2 software patch.