321 Studios OL-2706-01 Gas Grill User Manual


  Open as PDF
of 76
 
2-70
Cisco Internet OSS for VoIP: Infrastructure Manager Implementation Guide
OL-2706-01
Chapter 2 Provisioning
Step by Step Installation and Initial Configuration
Cisco PTC Patch Information
This section identifies and describes how to install the Cisco PTC 2.1.1 patches you must install after
the Cisco PTC product and component software have been installed.
You can access the Cisco PTC 2.1.1 patches at the following location:
http://www.cisco.com/cgi-bin/tablebuild.pl/cptc.
Read the README.txt file for detailed instructions on how to install the Cisco PTC 2.1.1 patches. You
must install all of the Cisco PTC patches listed in Table 2-5. Upon completion, you must ensure that the
CMNM application is synchronized with the SC2200. Go to the “Synchronizing CMNM with the
SC2200” section.
Synchronizing CMNM with the SC2200
This section describes the steps you are required to perform to ensure the CMNM application is
synchronized with the SC2200 prior to performing a Cisco PTC Cold Start.
Step 1 Start the CEMF Launchpad on the CMNM host as you did in section 4.6.8 and log in (user admin,
password admin).
cmnm-pri# setenv DISPLAY 171.71.150.111:0.0
cmnm-pri# cd /opt/cemf
cmnm-pri# bin/cemf session &
[1] 19680
Starting CEMF Manager Applications.
ILOG Views 3.0.2, Copyright (C) 1990-1998 by ILOG.
ILOG TGO 1.0.3, Copyright (C) 1997-1998 by ILOG.
Step 2 Click the Viewer icon in the CEMF Launchpad window.
Step 3 Click the MGC-Node-View node object in the Tree View pane in the Map Viewer window.
Step 4 Right-click on the MGC Node menu, then choose the MGC Node States option.
Step 5 Click on the Rediscover button in the States pane in the MGC Node States window.
Step 6 Click yes to confirm.
Synchronization between the CMNM and the SC2200 is complete. You should now start the Cisco PTC
servers.
Table 2-5 Cisco PTC 2.1.1 Patches
Patch Number Patch File Name
1 02_01_18_01.tar
2 02_01_18_02.tar
4 02_01_18_04.tar
 previous next