321 Studios OL-2706-01 Gas Grill User Manual


 
2-12
Cisco Internet OSS for VoIP: Infrastructure Manager Implementation Guide
OL-2706-01
Chapter 2 Provisioning
Configuration and Provisioning Solution Components
CMNM Configuration
You can open the following configuration tools from CMNM:
Voice Services Provisioning Tool (VSPT)
CiscoView, which allows you to configure and monitor the Cisco SLT and the LAN switch (Cisco
Catalyst 2900, 5500 and 6509) devices.
CMNM Troubleshooting
CMNM provides a full range of diagnostic and troubleshooting tools, such as IP and SNMP Ping, Alarm
and System Log, Host Status Check, Cross-Device Audit, and the Cisco MGC Toolbar that includes
CDR Viewer, Log Viewer, Trace Viewer, and Translation Verification Viewer.
Recommended Hardware Configuration for CMNM
The CMNM has substantial hardware requirements. The main consumer of resources in the CMNM
application is the CEMF application. The requirements below have been designed in order to create an
environment optimized for speed of response. These are general “rule of thumb” requirements and can
be adjusted to suit specific network deployments. Consultation with an experienced network design
specialist is recommended.
The Sun Fire 280R entry level server satisfies the above requirements. Refer to the CMNM User's Guide,
at the following URL, for in depth details about CEMF and the Cisco MGC Node Manager:
http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/cmnm21/index.htm.
Table 2-2 CMNM Hardware Requirements
Network Element
Small Network:
1-3Operators
1-5 Nodes
1 trap/second
Medium Network:
4-6 Operators
6-10 Nodes
2 traps/second
Large Network:
7-10 Operators
11-20 Nodes
4 traps/second
Number of machines One machine Two machines Three machines
Configuration Standalone Distributed
Presentation Server Management Server
Distributed
Presentation Server Management Server
RAM (GB) 2 2 2 2 4
Swap (GB) 2 1 2 1 2
Hard drives @ 9GB
each (minimum)
41418
Number of CPUs
and Speed
2 at 440Mhz 2 at 440Mhz 2 at 440Mhz 4 at 440Mhz 2 at 440Mhz