Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
30 WWW.WEBER.COM
®
ANNUAL MAINTENANCE
m DANGER
Failure to correct any problems described
on this page may result in a fire, which
can cause serious bodily injury or death,
and cause damage to property.
To keep your Weber
®
gas grill performing as safely and
efficiently as on day one, we strongly recommend that
you inspect and clean the spider/insect screen(s) and
burner tube(s) at least once a year. Below is important
information about these two areas of the grill that should
undergo annual maintenance.
If you observe an incorrect flame pattern or blocked
burner port, proceed to the “BURNER TUBE
CLEANING OR REPLACEMENT” instructions on the
following page.
BURNER FLAME PATTERN
The burner tube(s) in your Weber
®
gas grill was/were
factory set for the correct air and gas mixture. The correct
flame pattern is shown in illustration and described below:
• Burner tube(s) (1)
• Tips occasionally flicker yellow (2)
• Light blue (3)
• Dark blue (4)
Check burner flame pattern. If the flames do not match the
above description, it could be an indication that the spider/
insect screen(s) has/have become dirty or blocked.
WEBER
®
SPIDER/INSECT SCREEN(S)
The combustion air opening(s) of the burner tube(s) (5)
is/are fitted with stainless steel screen(s) to help prevent
spiders and other insects from spinning webs and
building nests inside the venturi section (6) of the burner
tube(s). These nests can obstruct the normal gas flow,
and can cause gas to flow back out of the combustion
air opening(s) (7). Symptoms of this kind of obstruction
include the odor of gas in conjunction with burner flames
that appear yellow and lazy. This obstruction could result
in a fire (8) in and around the gas valve(s), causing
serious damage to your grill.
NOTE: If a spider/insect screen becomes damaged or
cannot be cleaned, please contact the Customer Service
Representative in your area using the contact information
on our web site. Log onto www.weber.com®.
BURNER TUBE PORTS
Over time, from repeated use of the grill, the burner
tube ports will become dirty. Blocked and dirty ports can
restrict full gas flow. Following are ways to determine
whether burner tube ports are dirty or blocked.
• Grill does not reach desired temperature
• Grill heats unevenly
• One or more of the burner(s) do not ignite
KEEPING YOUR
WEBER
®
GRILL IN
TIP-TOP SHAPE
6
5
7
8
1
2
3
4