Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Fig. 8
7. Door Assembly
Insert hinge pin on bottom panel into hole located on
bottom of door (A). Insert door hinge bracket
into the cart frame (B) and align with the hole in the top
B
of the door. Attach the door hinge brackets to the cart
frame with four 5/32-in. x 10-mm truss head screws from
pack A and four 5/32-in. locking washers from pack B as
shown in fig. 8.
A
Fig. 9
8. Liquid Propane Tank Heat Shield Assembly
Attach the heat shield (A) to the back panel (B) and
cart frame(C) using four 5/32-in. x 10-mm truss head
screws from pack A and four 5/32-in. locking washers
from pack B as shown in fig. 9.
B
A
C
Fig. 10
A
9. Firebox Assembly
Remove the firebox assembly (A) from the carton
and carefully place onto the grill cart (B). Note: Take care
when moving the firebox assembly as the bottom flanges can
be bent thus causing the holes not to align.
Connect the small wire (C) that extends from the transformer
box to the wiring junction box (D) located above the left panel
near the rear of the cabinet as shown in fig. 10 exploded view.
T
M
T
M
D
C
B
CAUTION The firebox assembly is heavy and will
require two or more people to lift and position onto grill
cart. Failure to do so may result in back injury.
11