Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
2
Safety Instructions
Series or a combination LP-gas cylinder valve
and quick-disconnect assembly complying with
1.5.5-c and a safety relief device having a direct
communication with the vapor space of the
cylinder,(2) the cylinder supply system must be
arranged for vapor withdrawal, and (3)the
cylinder used must include a collar to protect the
cylinder valve.
The LP gas cylinder must be constructed and
marked in accordance with specification of U.S.
Department of Transportation(DOT). In
Canadian, gas cylinders must meet Canadian
Transportation and Communication (CTC)
specifications.
DANGER: If you smell or hear the hiss of
escaping gas from the LP gas cylinder. Get away
from the LP gas cylinder. Do not attempt to
correct the problem yourself. Call your fire
department(Do not make the call from near the
LP gas cylinder your telephone is an electrical
device)
Never connect an unregulated LP gas cylinder to
your grill. A gas regulator adjusted to have an
outlet pressure of 11’’Water column(W.C.)is
supplied for connection to the LP gas cylinder.
The pressure regulator and hose assembly
supplied with the appliance must be used.
Replacement pressure regulators and hose
assembly must be those specified by the
appliance manufacturer.
Have your LP gas cylinder filled by a reputable
LP gas dealer, and visually inspected and
re-qualified at each filling.
Have your LP gas dealer check the release valve
after every filling to assure that it remains free of
defects.
Always keep cylinder in an upright position.
Always close the cylinder valve when the grill is
not in use.
Do not subject LP gas cylinder to excessive
heat.
Never store your LP gas cylinder indoors. if you
store your grill indoors, always disconnect LP
gas cylinder FIRST, and store LP gas cylinder
safely outside.
When the appliance is not use, the gas must be
turn off at the supply cylinder.
Storage of an appliance indoors is permissible
only if the cylinder is disconnected and removed
from the appliance.
Cylinders must be stored outdoors in a
well-ventilated area out of the reach of children.
Disconnected cylinder must not be stored in a
building, garage or any other enclosed area.
HOSE ASSEMBLY SAFETY
The hose assembly must be inspected before
each use of the appliance . If it is evident there is
excessive abrasion or wear, or the hose is cut, it
must be replaced prior to the appliance being put
into operation.
TO CONNECT THE LP GAS SUPPLY
CYLINDER,J PLEASE FOLLOW THE
FOLLOWING STEPS:
1. Make sure tank valve is in its full off position
(Turn clockwise to stop)
2. Check tank valve to assure it has proper
external male threads. (Type 1 connection
per ANSIZ21.81)
3. Make sure all burner valves are in their off
position.
4. Inspect valve connections port and regulator
assembly. Look for any damage or debris.
Remove any debris. Inspect hose for damage.
Never attempt to use damaged or plugged
equipment. See your local LP gas dealer for
repair.
5. When connecting regulator assembly to the
tank valve, hand tighten nut clockwise to a
positive stop. Do not use a wrench to tighten.
Use of a wrench may damage quick
condition.
6. Open tank valve fully (counter-clockwise).
Use a soapy water solution to check all
connections for leaks before attempting to
light grill. If a leak is found, turn tank valve off
and do not use grill until a local LP gas dealer
can make repairs.
To disconnect LP gas cylinder:
a) Turn the burner valve off.
b) Turn the tank valve off fully. (Turn
clockwise to stop.)
c) Detach the regulator assembly from tank
valve by turning the quick coupling nut
counter clockwise.