Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
19
Tank
Blocking
Wire
1
To reduce the risk of serious bodily injury or death from fire or explosion:
Never remove guards or devices to prevent storage of spare or oversize LP Gas Cylinders not recommended for this grill.
WARNING
!
Step 21
Tank Blocking Wire Assembly
Attach the Tank Blocking Wire to the cart as follows. 1) Insert the Z shaped end into the hole in the bottom flange of the
control panel inside the cart. 2) Rotate the Wire so that the first leg is resting on the control panel flange. 3) Align the
loop end over the hole in the short top flange of the lower back Crossbrace. Fasten in place with 1) 5/32-30 x .39” Bolt
per Wire. Insert the bolt through the wire loop and into the tapped hole in the Crossbrace flange.
5/32-30 x .39” Bolt
1 pc
Bolt
2
3
Note:
Install 2 Tank Blocking Wires on
Model 6512.
To attach the center Tank Block-
ing Wire, use the same bolt that
fastens the Center Crossbrace to
the lower back Crossbrace in Step
6. Remove the bolt then re-install
it through the Tank Blocking Wire,
Crossbrace and into the Center
Crossbrace.
center
Tank
Blocking
Wire
Center Crossbrace