Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Question: Can I convert my Kenmore gas grill from
one fuel type to another?
Answer: Your Kenmore gasgrill is manufactured to
exact specifications and is approved by the Canadian
Standards Association (CSA). For your own safety,
conversion kits are not available and any attempt to
convert your grill from one gas type to another will void
your product warranty.
Question: Why doesnt the hose and regulator assem-
bly supplied with my new Kenmore grill fit the older LP
gas tank I've used for years?
Answer: The U.S. Government regulates gas appliances
and LP gas tanks. Whenever new regulations are passed
the LP gas tank fittings are altered. If your tank does not
fit the hose and regulator supplied with yournew grill, the
tank is outdated and must be replaced.
Question: What can cause grill parts to rustand what
affect does it have on the grill materials.
Answer: Rusting is a natural oxidation process and may
appear on cast-iron and steel parts. Rust will not affect
the short term performance of your grill or affect the taste
of your foods.
Stainless steel grill parts will not rust. However, weather-
ing and extreme heat can cause stainless steel Lid
surfaces to turn tan color. This is discoloration, not rust.
Question: How can I minimize the risk of rust or
stainless steel discoloration?
Answer: To protect against the natural rusting process,
the GrillBowl and Burners have a porcelain finish.
However, dropping, scraping or scratching these items
will damage the porcelain finish and allow rusting. We
recommend you "season" these items before and after
each use. Consistent seasoning will help deter rusting
and will create an easy to clean cooking surface.
Weathering and extreme heat can cause exterior
stainless steel surfaces to turn tan in color - which is
not to be confused with rust. Machine oils used in the
manufacturing processof stainless steel can also
cause this tanning color. After removing the protective
PVC film from your Gdll Lid use a Stainless Steel
Cleaner to polish the inside and outside of your grill
Lid. Never use abrasive cleaners or scrubbers. Follow
the easy "Cleaning Exterior Stainless Steel Surfaces"
procedures found inthis Owner's Manual.
Question: Sometimes my grill does not lightwhen I
push the Ignition Button. Why?.
Answer: Refer to the Lighting Instructions in this
Owner's Manual. Also check these common causes:
• IgnitionAA battery may need replacing.
• Ignitionwires may be loose. Remove the AA
battery, inspect the IgnitorJunction Box found behind
the Control Panel, and connect any loose wires.
Question: What is the best way to protect my new
Kenmore gas grill from the weather?.
Answer: Agood quality grill cover should be used to
protect your grinwhen not in use. Sears offers a cover
that is made to fit this particular grill model. Also, follow
the cleaning and maintenance instructions inthis
Owner's Manual on a timely basis, and your new grill wilt
give you years of enjoyment.
Question: Where can I buy replacement parts?
Answer: For the repair or replacement parts you need
call 6 am - 11 pm CST, 7 days a week 1-800-366-
PART (1-800--366-7278). Use only Sears authorized
parts. The use of any part that is not Sears authorized
can be dangerous and will also void your product
warranty. You will need yourmodel number and serial
number to order parts.
Question: Are the serial and model numbers of my
griUlisted somewhere for future reference?
Answer: Thisinformation is listedon a silver labelfound
on the right side of yourGrill Head under the Side Shelf.
Question: Sometimes ( hear a humming sound
coming from my regulator. What causes this?
Answer: The humming noise is actually the gas
flowing through the regulator. A low volume of noise is
perfectly normal and will not interfere with the opera-
tions of the grill. If humming noise is loud and exces-
sive you may need to purge air from the gas line or
reset the regulator excess gas flow device. Note: This
purging procedure should be done every time a new LP
gas tank is connected to your grill. For help with this
procedure refer to page 19, step 4, or call the
Customer Service Helpline at the number shown
below.
22