Dimplex BF33ST/DX Fire Pit User Manual


 
31
BF33ST, BF33DX, BF39ST, BF39DX, BF45ST, BF45DX
If the fireplace was operating prior to servicing allow at least 10 minutes for light bulbs
and heating elements to cool off to avoid accidental burning of skin.
Disconnect circuit power before attempting any maintenance or cleaning to reduce the
risk of electric shock or damage to persons.
TO REPLACE REMOTE CONTROL KIT
1. Open the steel curtains (remove glass doors if applicable).
2. Remove the log grate retaining screws and remove the log grate.
3. Pull the rear edge of the log set forward by grasping the ember bed by the sides
(handle the log set only by the ember bed and not the logs) and pulling firmly
until the rear tab pops out from under the back ledge, then lift out.
4. Locate the circuit board cover plate and remove the mounting screws.
5. Remove the circuit board cover plate by releasing assembly from the quick
connect connection.
6. Replace circuit board assembly kit.
7. Reassemble in the reverse order as above.
NOTE: To replace the log set, insert the front edge of the log set and pushing back
down until the rear tab snaps under the back ledge and the logs are resting against
the mirror.