CFM Corporation SHR52 Outdoor Fireplace User Manual


  Open as PDF
of 24
 
21
SHR Series Woodburning Fireplaces
20001384
Description
Designed to enclose the fireplace opening
with glass doors allowing the fire to remain
visible. Available in Polished, Brushed
Brass, Black and Pewter
Provides outside air for fuel conbustion
in the firebox. This accessory must be
installed before fireplace is installed.
Located on the floor in front of fireplace
to protect the floor from heat, hot embers,
ashes, etc.
Used to patch cracks in hearth.
Used to protect walls adjacent to the fire
-
place.
Required at each floor level and attic on
multi-story installation.
Used to support the chimney at each 30
feet of vertical height above the hearth and
at every 6 feet of inclined chimney run.
Each support adds 2¹⁄₂" to chimney length.
The following accessories for this appliance are available from your local Majestic Fireplaces distributor. Should you
need additional information beyond what your distributor can furnish, contact: CFM Corporation, 410 Admiral Blvd.,
Mississauga, Ontario, Canada L5T 2N6 Attn: Technical Services.
CAUTION: This fireplace and chimney assembly is a highly engineered system, and, as such, must be oper
-
ated only with CFM Corporation approved components. If you use an unapproved component to make any
modifications, you may create a possible fire hazard and will void the CFM Corporation warranty. In addi-
tion, such action may void the coverage provided by the owner’s insurance.
Accessories
Accessory
Glass Enclosure Kit
Outside Air Kit
Hearth Extension
Hearth Patching Kit
Wall Shield
Firestop
Chimney Support
Model No.
36SHGDKDP/BB/BK/S
42SHGDKT/BB/BK/S
48SHGDKDP/BB/BK/S
52SHGDK/BB/BK/S
AK-MST
EH2416
HPC1
SP40
FS2A (straight flue)
FS6A (30° inclined flue)
11CS (11" flue)
 previous next