Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
B102097-0-0113 Page 9
Grill Mountings
Assemble your base option before assembling your Broilmas-
ter grill head.
Refer to the Broilmaster Cart, Base, and Post instructions provided
with each accessory for assembly, installation, and mounting pro-
cedures.
Before You Begin
All Broilmaster grills require some assembly and installation. Follow
all instructions unless noted to apply only to other specic models.
If you purchased an accessory with your Broilmaster, follow
the instructions provided with the accessory for assembly and
installation. If an instruction refers to a step that is not required for
your grill model, please continue to the next step.
Compare the parts found in the shipping container to the parts list
provided. If any parts are missing contact your Broilmaster dealer
before beginning assembly.
CAUTION: Parts may have sharp edges. Wear leather work
gloves and handle parts carefully during the unpacking, as-
sembly and installation.
Recommended Tools
These items are recommended for the assembly of your grill:
• Phillips screwdriver
• Adjustable wrench
• Socket set
• 1/8” Allen Wrench
• Cordless Drill with Phillips Bit
Note: Built-in Kit can not be used with Independence Charcoal
Grill.
Remove Lid From Bottom
1. To ease installation, remove the grill body top from the grill
body bottom by removing the two hinge pins and clips. See
Figure 1.
REAR OF GRILL
Figure 1
Install Grill Body Bottom on Mounting (cart or posts)
Note: When mounting to a patio post or in-ground post the four
“carriage bolts” and nuts in the post mounting holes located on
the grill bottom must be removed and relocated to the four out-
side cart mounting holes marked by arrows. See Figure 2.
Figure 2
1. Refer to the cart or post installation instructions that came
with the mounting options to attach grill body bottom to
mounting option.
GRILL ASSEMBLY